Welding Rectifier RCD 600 DIGIT II
Three-phase power supply rectifiers for MMA and LIFTIG welding in direct current with electronic current adjustment. Optimized for all types of electrodes up to 8 Ø mm (rutile, basic, stainless, aluminum and hard facing) Arc-Air cutting and gouging with electrodes up to 8 Ø mm Simple and intuitive control panel with Hot Start and Arc […]
- Three-phase power supply rectifiers for MMA and LIFTIG welding in direct current with electronic current adjustment.
- Optimized for all types of electrodes up to 8 Ø mm (rutile, basic, stainless, aluminum and hard facing)
- Arc-Air cutting and gouging with electrodes up to 8 Ø mm
- Simple and intuitive control panel with Hot Start and Arc Force adjustment and welding current and voltage reading on digital displays.
- Open Arc mode function for optimized welding of fluxed or solid wires using the AFFLUX 500 wire feeder.
- Shipyard version built with wheels and poles for ease of movement in shipyards.
- Rail version ideal for applications “on site”, recommended for construction and shipyards.
| Current type | DC |
| Input voltage | 3x400V (+/- 10%) |
| Power factor | cos Φ 0,98 |
| Max. primary current (MMA) | 67A |
| Maximum power (MMA) | 46kVA |
| No-load voltage | 76V |
| Welding current | 6-600A |
| Arc-Air current | 100-850A |
| Duty Cycle 60% | 600A |
| Duty Cycle 100% | 465A |
| Duty Cycle ARC-AIR a 30% | 850A |
| Duty Cycle ARC-AIR a 60% | 600A |
| Duty Cycle ARC-AIR a 100% | 450A |
| Electrodes | Ø 8,0mm |
| Arc-Air electrodes | Ø 8,0mm |
| Protection | IP21S |
| Insulation class | H |
| Weight DIGIT II | 208,5 Kg |
| Weight SHIPYARD | 218 Kg |
| Weight RAIL | 206,5 Kg |
| Dimensions DIGIT II | 780 x 670 x 980 mm |
| Dimensions SHIPYARD | 780 x 670 x 980 mm |
| Dimensions RAIL | 660 x 560 x 1020 |
