Welding inverter MIG 504 CW BASIC

Welding inverter MIG 504 CW BASIC

Three-phase inverter for MIG/MAG welding with separated wire feeder, coated electrode MMA and LIFTIG welding in direct current. Modular equipment for easy displacement and cooling unit option. Two displays for simultaneous reading of welding current and voltage and HOLD function. Electronic inductance adjustment for filling or penetration welds. Excellent arc ignition for jobs with wire […]

2T / 4T ARC FORCE
Contact us

  • Three-phase inverter for MIG/MAG welding with separated wire feeder, coated electrode MMA and LIFTIG welding in direct current.
  • Modular equipment for easy displacement and cooling unit option.
  • Two displays for simultaneous reading of welding current and voltage and HOLD function.
  • Electronic inductance adjustment for filling or penetration welds.
  • Excellent arc ignition for jobs with wire from Ø 0,8 to 1,6mm (solide) and Ø 0,9 to 2,4 (fluxed).

Input voltage 3x400V (+/- 10%)
Frequency 50/60 Hz
Maximum primary current (MIG/MMA/TIG) 46,4A/47,8A/37,2A
Maximum power (MIG/MMA/TIG) 31,9/32,2/25,7kVA
No-load voltage 92V
Current regulation 40-500A
Duty Cycle 40% 500A
Duty Cycle 60% 455A
Duty Cycle 100% 360A
Wire diameter (Solid/fluxed) Ømm 0,8-1,6/0,9-2,4
No. Feed Rolls - Motor Power 4R - 75W
Wire speed 0,5-30 m/min
Spot welding time 0-10 s
Post-gas time 0-10 s
Protection IP 23S
Insulation class H
Weight 97,9kg
Dimensions (HxWxL) 1184x470x1030

Features

Multi-process
Multi-Process

Multi-Process machines, MIG/MAG, TIG and MMA welding, all on the same equipment.

MecaPulse
MecaPulse

Low heat continuous welding with less workpiece distortion and excellent gap bridging of thin plates. Great reduce of wire and energy consumption.

Inductance
Inductance

Electronic inductance adjustment for filling or penetration welds.

Digimig
Digimig torch

Adjustment of wire speed, voltage and work memory selection directly on the torch, without the need for the operator to move to the welding equipment.

Arc-Air
Cutting e Gouging

ARC-AIR function for cutting and gouging.