Welding inverter MIG 404 C SYN

Welding inverter MIG 404 C SYN

Three-phase inverter for standard or synergic MIG/MAG welding with separated or integrated wire feeder, coated electrode MMA and LIFTIG welding in direct current. Manual or synergic adjustment for mild steel (SG2/3), stainless steel and aluminum and fluxed wires of different diameters (0.8mm, 1.0mm, 1.2mm and 1.6mm). Compact equipment for easy displacement and cooling unit option. […]

2T / 4T ARC FORCE
Contact us

  • Three-phase inverter for standard or synergic MIG/MAG welding with separated or integrated wire feeder, coated electrode MMA and LIFTIG welding in direct current.
  • Manual or synergic adjustment for mild steel (SG2/3), stainless steel and aluminum and fluxed wires of different diameters (0.8mm, 1.0mm, 1.2mm and 1.6mm).
  • Compact equipment for easy displacement and cooling unit option.
  • Excellent arc ignition and electronic inductance adjustment for filling or penetration welds.

Input voltage 3x400V (+/- 10%)
Frequency 50/60 Hz
Maximum primary current (MIG/MMA/TIG) 34,8/36,6/28,1A
Maximum power (MIG/MMA/TIG) 24,0/25,5/19,5kVA
No-load voltage 92,5V
Current regulation 40-400A
Duty Cycle 35% 400A
Duty Cycle 60% 290A
Duty Cycle 100% 240A
Wire diameter (Solid/fluxed) Ømm 0,8-1.6/0.9-1.6
No. Feed Rolls - Motor Power 4R - 75W
Wire speed 0,5-30 m/min
Spot welding time 0-10 s
Post-gas time 0-10 s
Protection IP 23S
Insulation class H
Weight without cooler 62,4kg
Dimensions (HxWxL) 899x470x1030

Features

Multi-process
Multi-Process

Multi-Process machines, MIG/MAG, TIG and MMA welding, all on the same equipment.

MecaPulse
MecaPulse

Low heat continuous welding with less workpiece distortion and excellent gap bridging of thin plates. Great reduce of wire and energy consumption.

Inductance
Inductance

Electronic inductance adjustment for filling or penetration welds.

Digimig
Digimig torch

Adjustment of wire speed, voltage and work memory selection directly on the torch, without the need for the operator to move to the welding equipment.