Welding inverter MONOMIG 200 C SYN

Welding inverter MONOMIG 200 C SYN

Light and portable single-phase inverter for MIG/MAG welding with integrated wire feeder, coated electrode MMA and LIFTIG welding in direct current. Allows to weld all types of mild steels, stainless steels and aluminum and fluxed wires. Manual or synergic adjustment for applications with wires from 0.6 to 1.0 Ø mm (solid) and 0.9 (fluxed). Easy […]

2T / 4T ARC FORCE
Contact us

  • Light and portable single-phase inverter for MIG/MAG welding with integrated wire feeder, coated electrode MMA and LIFTIG welding in direct current.
  • Allows to weld all types of mild steels, stainless steels and aluminum and fluxed wires. Manual or synergic adjustment for applications with wires from 0.6 to 1.0 Ø mm (solid) and
    0.9 (fluxed).
  • Easy to use and two displays for welding current and voltage simultaneous reading.
  • Electronic inductance adjustment for filling or penetration welds.

Input voltage 1x230V (+/- 10%)
Frequency 50/60 Hz
Maximum primary current (MIG/MMA/TIG) 40A/38,6A/28A
Maximum power (MIG/MMA/TIG) 8kVA/8,3kVA/6,4kVA
No-load voltage 69V
Current regulation 25-200A
Duty Cycle 40% 200A
Duty Cycle 60% 163A
Duty Cycle 100% 127A
Wire diameter (Solid/fluxed) Ømm 0,6-1,0
No. Feed Rolls - Motor Power 2R - 40W
Wire speed 1,5-15,0
Spot welding time -
Post-gas time Yes
Protection IP 21S
Insulation class H
Weight 12,5kg
Dimensions 410x210x470

Features

Multi-process
Multi-Process

Multi-Process machines, MIG/MAG, TIG and MMA welding, all on the same equipment.

MecaPulse
MecaPulse

Low heat continuous welding with less workpiece distortion and excellent gap bridging of thin plates. Great reduce of wire and energy consumption.

Inductance
Inductance

Electronic inductance adjustment for filling or penetration welds.

Digimig
Digimig torch

Adjustment of wire speed, voltage and work memory selection directly on the torch, without the need for the operator to move to the welding equipment.